Overview
The new HPE ProLiant DL365 Gen11 server is a rack-optimised, 1U 2P dense solution that delivers exceptional compute performance, upgraded high-speed data transfer rates and memory depth at 2P compute capacity. Featuring fourth-generation AMD EPYC™ processors with up to 128 cores, increased memory bandwidth (up to 6 TB), and high-speed PCIe Gen5 I/O, the HPE ProLiant DL365 Gen11 server is an excellent rack-optimised 1U 2P intensive solution. Silicon Root of Trust anchors the server firmware to an HPE-exclusive ASIC that creates an immutable fingerprint for the AMD secure processor that must be matched precisely before the server can boot.
HPE ProLiant DL365 Gen11 servers are an excellent choice for users who need increased compute density with built-in security and flexibility. Scalable, compute-intensive solution for high-performance workloads such as general-purpose virtualisation, virtual desktop infrastructure (VDI), electronic design automation (EAD) or computationally assisted design (CAD).
8 SFF Front View – 8 SFF & No Media Option Shown
| 1. | Quick removal access panel | 6. | Health LED |
| 2. | Serial no. label pull tab | 7. | NIC status LED |
| 3. | Optional Media Bay:
Option Shown: no media Optional: +2 SFF U.3 Tri-mode drive cage (total max 10 SFF) Optional: 9.5mm SATA DVD-ROM/RW Optical Drive |
8. | UID button LED |
| 4. | USB 3.2 Gen1 port | 9. | iLO service port |
| 5. | Power On/Standby button and system power LED | 10. | 8 SAS/SATA/NVMe drive bays |
Internal View
| 1. | DDR5 DIMM slots. Shown populated in 24 slots | 6. | (Under) OCP 3.0 Slot 1 |
| 2. | Hot Plug redundant HPE Flexible Slot Power supplies | 7. | 2x USB 3.2 Gen1 ports |
| 3. | Secondary Riser connector cage, optional | 8. | Fan cage shown with 7 High Performance Fans |
| 4. | (Under) OCP 3.0 Slot 2 | 9. | 2 Processors (heatsinks shown) |
| 5. | Primary PCIe riser cage, standard |
Rear View – Standard for all DL365 Gen11
| 1. | Slot 1 PCIe 5.0 | 6. | VGA port |
| 2. | OCP 3.0 Slots | 7. | Serial port (optional) |
| 3. | Slot 2 PCIe 5.0 | 8. | Dedicated iLO management port |
| 4. | Hot-plug Power Supply 2 | 9. | USB 3.2 Gen1 ports |
| 5. | Hot-plug Power Supply 1 | 10. | UID LED |
Form Factor
- 1U rack
Chassis Types
- 8 SFF with optional optical drive kit, and optional SFF or NVMe drive bay options
- 20 EDSFFdrive bay.
- 2 Single Width or 2 Double Width GPUs with 8 EDSFFor 4SFF U.3 NVMe drive bay.
System Fans
- Choice of Standard Fan Kit and Performance Fan Kit. One fan per kit.
- 2 CPUs
– Standard fan kits should be supported when the processors are equal to or lower than cTDP 240W
– Performance fan kits should be supported when the processors are higher than cTDP 240W
– Performance fan kits should be required when drive is NVMe or SAS4 drives.
– Performance fan kits should be required when 10 SFF SAS/SATA/NVMe is configured
– Performance fan kits should be required when EDSFF or GPU CTO Servers are configured
- Dimensions (Height x Width x Depth)
4.29 X 44.89 X 64.94 cm
1.69 X 17.67 X 25.57 in
- Packaging
91.6 X 60 X 24.2 cm
36.06 X 23.63 X 9.53 in
- Weight (approximate)
12.70 kg
27.94 lb
– SFF Minimum: 8 SFF chassis with 8 HDD blanks, 2x Drive Bay blanks, 1x processor including standard heat sink, 2x DIMMs, 1x power supply (plus blank), 1x Smart Array, 1x Riser installed, cables for the above)
12.70 kg
27.94 lb
- Packaged weight
24.36 kg
53.7 lb
– SFF Maximum: 10x SFF hard drives, 2x processors, 2 heat sinks, 2x power supplies, 1x Smart Array, 2x Risers installed, 16x DIMMs, 2x power supply, cables for the above
18.39 kg
40.46 lb
- Packaged weight
29.36 kg
64.73 lb
Configuration Information
| CTO Server | HPE ProLiant DL365 Gen11 8SFF Configure-to-order Server |
| SKU Number | P53933-B21 |
| Processor | Not included as standard |
| DIMM Slots | 24-DIMM slots* |
| Storage Controller | Choice of HPE OCP or PCIe plug-in controller |
| PCIe | 1 PCIe x16 Primary Riser |
| Drive Cage – included | 8 SFF (Backplane is not included) |
| Network Controller | Choice of OCP and stand up card |
| Fans | Not included as standard** |
| Management | Default: HPE iLO Standard with Intelligent Provisioning, HPE OneView Standard (requires download), HPE GreenLake for Compute Ops Management (subscription included) |
| USB | Front:: 1x USB 3.2 Gen1 + 1x iLO service port
Rear: 2x USB 3.2 Gen1 Internal: 2x USB 3.2 Gen1 |