H3C CR16000-M16 Core Router Chassis

H3C CR16000-M16
H3C CR16000-M16 Core Router Chassis. Switching Capacity: 396.98Tbps. Packet Forwarding Rate: 105600Mpps. Interface Type: Supports FE, GE, 10GE (LAN/WAN) 25GE, 40GE, 50GE, 100Ge, 155M POS, 622M POS, 2.5G POS, CPOS, ATM, E1/T1 interfaces Supports 100Ge/40Ge port switching Supports 155M POS/622M POS/Ge port switching Supports ATM/POS port switching
Key Specifications
Need configuration help?
Our CCIE certified engineers can help you verify compatibility.
Fast Dispatch
Global logistics network aiming for same-day handover.
Guaranteed Quality
Every unit undergoes rigorous 38-point inspection test.
Global Reach
Trusted by enterprise clients across 6 continents.
Expert Support
Certified network engineers ready to assist with configuration.
بررسی اجمالی
مشخصات فنی
| Catalog Description | |
|---|---|
| Description | H3C CR16000-M16 Core Router Chassis |
| Key Specifications | |
| Switching Capacity | 396.98Tbps |
| Packet Forwarding Rate | 105600Mpps |
| Dimensions(W×D×H)(Unit:mm) | 440×440×353(8RU) |
| Power Supply System | 4 built-in AC and DC power supplies (N+M redundancy) AC power supply does not take up additional Line Card slots |
| Supervisor Engine Module | 2 (1+1 redundancy) |
| Line Card | 16 |
| Product Specifications | |
| Switching Capacity | 396.98Tbps |
| Packet Forwarding Rate | 105600Mpps |
| Supervisor Engine Module | 2 (1+1 redundancy) |
| Line Card | 16 |
| Dedicated Fabric Module | Supports Dedicated Fabric Module |
| Cooling method | Front and Rear Ventilation, Straight-through Air Ducts |
| Standalone Fan Frame | Redundant independent fan frame |
| Power Supply System | 4 built-in AC and DC power supplies (N+M redundancy) AC power supply does not take up additional Line Card slots |
| Dimensions(W×D×H)(Unit:mm) | 440×440×353(8RU) |
| Interface Type | Supports FE, GE, 10GE (LAN/WAN) 25GE, 40GE, 50GE, 100Ge, 155M POS, 622M POS, 2.5G POS, CPOS, ATM, E1/T1 interfaces Supports 100Ge/40Ge port switching Supports 155M POS/622M POS/Ge port switching Supports ATM/POS port switching |
| Unicast routing | Supports dual IPv4 and IPv6 stacks Supports static routing, RIP, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+Supports VRRP, VRRPv3Supports IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, traceroute IPv6 socket IPv6, static IPv6 DNS, specified IPv6 DNS server, TFTP IPv6 client Support for IPv4 to IPv6 transition Technical support for ICMPv6 MIB, UDP6 MIB, TCP6 MIB, IPv6 MIB, etc. Support for Equivalent Routing ECMP, Non-equivalent Routing UCMP Support for Policy Routing Support for Routing Policies support GRE and other tunneling features support static routes FRR, OSPF FRR, ISIS FRR, BGP FRR support routing information filtering based on IP address, AS Path, route tagging |
| Multicast | Supports routing protocols such as PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, Anycast-RP Supports IGMP V1/V2/V3, IGMP Snooping V1/2/3 Supports PIM6-DM, PIM6-SM, PIM6-SSM Supports MLD (Multicast Listener Discovery) V1/V2, MLD Snooping V1 supports multicast policy and multicast QoS. |
| MPLS VPN | Supports LDP, RSVP-TE and other MPLS label distribution protocols Supports P/PE function, compliant with RFC2547bis protocol Supports three cross-domain MPLS VPN methods (Option1/Option2/Option3) Supports hierarchical PE (HoPE) Supports multi-role hosts Supports Layer 2 and Layer 3 VPNs, and cross-domain L2 and L3 VPNs implementations Supports MPLS TE FRR and LDP FRR, switching time is less than 50ms Supports 6PE, 6vPE Supports Distributed Multicast VPN Supports ACL to identify the traffic function, the traffic will be imported to a different VPN Supports MPLS VPN network fault locating function, Supports MPLS PING/TRACEROUTE Supports L2 VPN access to L3 VPN Supports VPLS access in QinQ mode |
| BRAS Services | Supports PPPoE, PPPo EoVLAN, PPPo EoQ access authentication Supports Layer 2-Portal, Layer 3-Portal, QinQ Portal access authentication Supports IPoE, IPo EoVLAN, IPo EoQ access authentication Supports subnet leased line, interface leased line, L2VPN leased line and other leased line access authentication Supports L2TP technical support for Layer 2 unaware access, Layer 3 unaware access Support for L2TP technology to support Layer 2 non-sensitive access, Layer 3 non-sensitive access support for standard RADIUS/TACACS + protocols with the completion of remote user authentication, authorization, billing and other management functions support for Radius, TACACS, COPS and other protocols to support the iTA (Intelligent Targeted Accounting), differentiate between different types of services according to the destination address, to achieve different types of user services billing, bandwidth control and QoS support. Wired wireless unified authentication solution, through high-capacity BRAS to meet the demand for massive user terminal access, to meet the mobility needs of wireless terminals. |
| ACL | Supports IPv4 and IPv6 standard access control lists (ACLs) and extended access control lists (EACLs) Supports Layer 2, Layer 3, and Layer 4 based ACLs Supports configuration of ACLs on Layer 2 physical interfaces, Layer 3 physical interfaces, and Layer 3 VLAN interfaces Supports Ingress/Egress ACLs Supports Hardware Access Control Lists Supports IPv4, IPv6 Standard and extended ACL capability in independent or mixed state, number of entries in IN and OUT directions ≥ 1024 |
| QoS | Supports Hierarchical QoS (H-QoS), supports queue scheduling mechanisms such as PQ/WFQ/CBWFQ Supports 5 levels of H-QoS scheduling to ensure fine-grained service management Supports Traffic Shaping Shaping Supports congestion avoidance such as Tail Dropped TD/WRED Supports Priority Marking Mark/Remark support, supports 802.1p, TOS, DSCP, EXP priority mapping support for congestion avoidance, traffic supervision and shaping functions (Car, traffic Shaping, etc.) support for packet marking functions (based on IP address, port number, 802.1P, DSCP values, etc.) support for multi-level queuing mechanism for packets (including CQ, PQ, LLQ, WFQ, etc.) support for multicast QoS functions |
| Ethernet Features | Supports 802.1Q Supports ARP protocol Supports 802.1Q VLAN Trunk function Supports QinQ termination Supports 802.3d(STP)/802.3w(RSTP)/802.3s(MSTP) PVST for interfacing to different Layer 2 networks Supports IEEE 802.3ad (Port Aggregation), Static Port Aggregation, and Cross-board Port Aggregation Supports Port mirroring and flow mirroring support Port mirroring and flow mirroring support Combined bi-directional traffic mirroring from multiple physical interfaces or VLAN interfaces in different Line Card slots to multiple physical interfaces in different Line Card slots in one mirroring process Support FlexE, which can be realistically configured with the corresponding service boards Support sub-interface slicing support According to different network service requirements such as latency, bandwidth, security, and reliability, etc., the network can be divided into sliced networks. Slicing network according to different network service requirements such as latency, bandwidth, security and reliability |
| SDN Technology | Support VXLAN, EVPNSupport PCEP protocol Support BGP-LS and other network information collection protocols Support Netconf, YANG protocol Support MPLS, SRv6Support CBTS, EVPN VPWSSupport Openflow protocol Support BGP Flow Spec function Support Telemetry protocol Support 5G bearer network key technologies: Supports EVPN, SRv6, 1588v2 protocols Supports SRv6 Policy failure escape to SRv6 BE Supports SRv6-Policy tuning capability based on delay/bandwidth/packet loss rate Supports SR-MPLS BE, SR-MPLS TE, SR-MPLS TE policy, SRv6 TE Policy Supports SR-SRv6 TE Policy based on the SR/SRv6 TE Policy path ping, tracert, and traffic statistics functions Support SR BE-based ping and tracert functions Support SRv6 TE policy Layer 10 SID function, forwarding capacity is not affected |
| Netflow Analysis | Supports Netstream, conforms to V5/V8/V9 output format, supports sampling function and stream statistics function Supports multi-log host function Supports hardware network traffic application analysis technology supports IPv4/IPv6/MPLS traffic collection and analysis Supports traffic collection and statistics in the direction of physical port access and in the direction of Layer 3 VLAN interface access and in the direction of Layer 3 VLAN interface traffic collection and statistics Supports anomaly flow Abnormal traffic detection and monitoring (host-monitor) |
| Reliability | Key Components Main control board, switching network board, power supply, fan support redundancy backup Service interface Switching board contains NP (Network Processor, Network Processor) chip, which can realize flexible expansion of new functions and evolution capabilities. BGP4+,MPLSL3VPN,MPLSTE,PIMSM NSR (non-stop routing technology), master and backup inversion without packet loss support for IP/LDP/VPN/TE/VLL fast rerouting, support for IP/TE automatic rerouting technology IGP/BGP support for BFD, the realization of the protocols to achieve rapid fault detection mechanism, failover time of less than 50ms Support for Fast routing convergence capabilities, cut back without packet loss support iFIT with flow detection, real-time detection of network faults, rapid location of fault points, and support for the detection of the performance data obtained from the visualization of the management of support for the BER reversal of the average trouble-free time (MTBF) is greater than 20 years, the average time to repair (MTTR) not more than 0.5 hours |
| Security | Supports user hierarchical management and password protection, supports AAA security authentication protocols (e.g. Radius, TACACS+, etc.) Supports control plane anti-attacks Supports secure authentication function Supports trusted boot, trusted verification of system bootloader, system programs, important configuration files, etc. Supports standard and extended ACLs, which can filter messages to prevent network attacks Supports prevention of ARP, unknown Support to prevent attacks on ARP, unknown multicast messages, broadcast messages, unknown unicast messages, local segment route scanning messages, TCP SYN messages, TTL=1 messages, PADI, DHCP, TCP Sync, Portal, protocol messages, etc. Support for Secure Network Management SNMPv3 |
| System Management | Supports in-band and out-of-band network management Supports Console/AUX Modem/Telnet/SSH2.0 command line configuration Supports FTP, TFTP, Xmodem, SFTP file uploading and downloading management Supports SNMP V1/V2/V3 Supports RMON V1/V2, supports groups 1, 2, 3, and 9 Supports NTP clocking Supports NQA (Network Quality Analyzer) support after the failure of the alarm and self-recovery support for DHCP service support data logging support ICMP support Syslog support Traceroute support multi-threaded TELNET access to the device support 1588v2 |
| Working Environment | Operating Temperature: 0-45℃ |
| Ordering Information | |
| Main Control Engine Board | |
| 0231AH6B | SR07MPUA3-M - H3C CR16000-M Supervisor Engine Module(A3) |
| Mesh Board | |
| 0231AN9G | SFE-A1 - H3C CR16000-M Network Service Processing Unit (A1) |
| 0231ANJV | 0231ANJV - H3C CR16000-M Network Service Processing Unit (A2) |
| 0231AKUS | SRFP-A3 - H3C CR16000-M Service Routing and Forwarding Processing Board |
| Power Supply Options | |
| 0231A8LL | PSR2500-12A - 2500WAC Power Module(A) |
| 0231A8LQ | PSR2400-12D - 2400WDC Power Module(D) |
| 0231AEUS | PSR2500B-12AHD-F - 2500W AC & High-Voltage DC power Module (Supports 220V AC, 240V DC, and 380V DC) |
| 0231AJS7 | PSR1200B-12A - 1200WAC Power Module(A) |
| 0231AKXK | PSR1200B-12A1-F - H3C PSR1200B AC power Module,1200W |
| Main Control Software License Certificate (Default Configuration 1) | |
| 3130A0PA | LIS-CR16000 - H3C CR16000 Chassis Software |
| Rack Rail | |
| 0231A0HP | LSTM1KSGD0 - Rack Rail Accessory—350 mm to 500 mm |
| 0231A4EK | LSXM1BSR - 1U Adjustable Rack Rail—630 mm to 900 mm |
| 0231AJE5 | RL-1U-A - 1U Adjustable Rack Rail—380 mm to 630 mm |
| Brush Wind Deflector | |
| 2150A0HL | RK-1U-BRUSH PANEL - 1U Rack Rail Brush Panel Assembly |
| Serial Cable | |
| 04042967 | CAB-CON-1.8m - Configuration Serial Cable—1.8 m—(DB9 Female to 8-pin Ethernet Port) |
| 0404A1EE | CAB-Console-1.8m-W31R - Configuration Port Cable-1.8m-(RJ45P)-(UL2725(3C28AWG))-(USB AP) |
| Fan Options | |
| 0231AJCV | FAN-80B-3-A - Fan Module (M16) |
| Product Identity | |
| Brand | H3C |
| Series | H3C CR16000-M Series Router |
نظرات
هنوز نظری ثبت نشده است
اولین کسی باشید که برای این محصول نظر میدهد.
گارانتی
خطمشی گارانتی استاندارد
All hardware sold by ITMall includes our 3-Year Free Maintenance and 1-Year RMA Replacement Service. Please refer to our Warranty Policy for details.
- 1-Year Advance Replacement (RMA)
- 3-Year Free Repair Service
- Full coverage for functionality defects
فرآیند RMA بدون دردسر
We streamlined the return process to minimize your network downtime. Our engineering team provides pre-return diagnostics to ensure hardware is truly defective.
- 30-Day satisfaction guarantee return window
- Automated RMA portal access for instant tracking
- Restocking fee waived for functionality issues
پشتیبانی مهندسی تایید شده
Our products are backed by CCIE-certified engineers who provide expert guidance on compatibility, configuration, and troubleshooting at no extra cost.
- Free pre-sales topology consultation
- Remote troubleshooting & firmware advice
- Simulation lab testing before dispatch
لجستیک جهانی و بستهبندی
We ship to 85+ countries using premium anti-static packaging to ensure safety. Orders placed before 14:00 (GMT+8) are typically dispatched the same day.
- Double-walled boxes with customer molded foam
- Blind shipping support for channel partners
- Real-time tracking via FedEx / DHL / UPS
منابع
سوالات متداول
What is the Switching Capacity specification for CR16000-M16?
What is the Packet Forwarding Rate specification for CR16000-M16?
What is the Dimensions(W×D×H)(Unit:Mm) specification for CR16000-M16?
What is the Power Supply System specification for CR16000-M16?
Is this product Brand New?
What is the warranty period?
Do you offer volume discounts?
How fast can you ship?
هنوز سوالی دارید؟