H3C LS-10506X-G-POE Ethernet Switch is H3C S10506X-G Ethernet Switch Chassis,PoE.
Brand H3C
N/AVerified
H3C LS-10506X-G-POE Ethernet Switch
Model (MPN)
0235A4FN
Condition
Factory Sealed
Out of Stock
H3C LS-10506X-G-POE Ethernet Switch. H3C S10506X-G Ethernet Switch Chassis,PoE.
Key Specifications
Power SupplyAC：100V～240V
Hardware ArchitectureOrthogonal CLOS Architecture
Intelligent lossless EthernetSupports PFC and AIECN, RoCEv2
Environmental requirementsTemperature range: 0°C～45°C Relative humidity: 5%～95% (non-condensing)
ModelLS-10506X-G-POE
Product Code0235A4FN
Your Price
Best Value
$38,571.00
Availability Out of Stock
Quantity
Need configuration help?
Our CCIE certified engineers can help you verify compatibility.
Secure Payment
VISA
Pay
WIRE
Fast Dispatch
Global logistics network aiming for same-day handover.
48hrs
Avg. Shipping
99%
On-Time
Guaranteed Quality
Every unit undergoes rigorous 38-point inspection test.
3Year
Warranty
0.1%
RMA Rate
Global Reach
Trusted by enterprise clients across 6 continents.
85+
Countries
20k+
Clients
Expert Support
Certified network engineers ready to assist with configuration.
24/7
Assistance
CCIE
Certified
Overview
Specifications
| Key Specifications | |
|---|---|
| Power Supply | AC：100V～240V |
| Hardware Architecture | Orthogonal CLOS Architecture |
| Intelligent lossless Ethernet | Supports PFC and AIECN, RoCEv2 |
| Environmental requirements | Temperature range: 0°C～45°C Relative humidity: 5%～95% (non-condensing) |
| Model | LS-10506X-G-POE |
| Product Code | 0235A4FN |
| Product Specifications | |
| Hardware Architecture | Orthogonal CLOS Architecture |
| Ethernet Features | Supports 802.1Q, Supports LLDP, Supports Static MAC, Dynamic MAC, Blackhole MAC Configuration, Supports MAC address learning count limitation, Supports Port Mirroring (SPAN/ERSPAN/RSPAN) and Flow Mirroring functionality, Supports Port Aggregation, Supports 802.1d (STP), 802.1w (RSTP), 802.1s (MSTP), Supports Dynamic Link Aggregation, Static Port Aggregation and Cross-board Link Aggregation, Supports MAC/IP subnet/protocol/strategy/Port VLAN |
| Routing Features | Supports Static Routing, RIP, OSPF, IS-IS, BGP4, etc., Supports Equal-cost Routing, Supports Policy Routing, Supports Routing Policies, Supports IPv4 and IPv6 Dual-stack, Supports IPv6 Static Routing, RIPng, OSPFv3, IS-ISv6, BGP4+, Supports DHCPv6 Relay, Supports DHCP Relay Agent, Supports DHCP Snooping, Supports DHCP OPTION 82, Supports DHCP OPTION 43, Supports VRRPv3, Supports Pingv6, Telnetv6, FTPv6, TFTPv6, DNSv6, ICMPv6, Supports IPv6 Transition Technologies including IPv6 Manual Tunnel, 6to4 Tunnel, ISATAP Tunnel, GRE Tunnel, Supports IPv6 Equal-cost Routing, Supports IPv6 Policy Routing, Supports IPv6 Routing Policies |
| Multicast | Supports PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, Any-RP routing protocols, Supports IGMP V1/V2/V3, IGMP V1/V2/V3 Snooping, Supports PIM6-DM, PIM6-SM, PIM6-SSM, Supports MLD V1/V2, MLD V1/V2 Snooping, Supports Multicast Policies and Multicast QoS, Supports User Rapid Leave Mechanism, Supports Multicast Query |
| Programmability and Automation | Supports Ansible automation technology Supports network automation orchestration through Python/NETCONF/TCL/RESTful API for Dev Ops automated operations and maintenance |
| Intelligent lossless Ethernet | Supports PFC and AIECN, RoCEv2 |
| SDN/VXLAN | Supports VXLAN two-layer switching, Supports VXLAN three-layer switching, Supports VXLAN routing switching, Supports VXLAN gateway, Supports VXLAN, BGP EVPN features, Supports IS-IS+ENDP VXLAN distributed control plane, Supports establishing IPv6 VxLAN tunnel to enable intercommunication of IPv4/IPv6 packets between different VxLANs, Supports micro-segmentation, Supports VXLAN centralized control plane based on Open Flow+Netconf, Supports distributed Anycast gateway, Supports automated deployment of VxLAN Fabric |
| MPLS/VPLS | Supports L3 MPLS VPN Supports L2 VPN: VLL (Martini, Kompella) Supports MCE Supports MPLS OAM Supports VPLS, VLL Supports hierarchical VPLS, and QinQ+VPLS access Supports P/PE functions Supports LDP protocol |
| Virtualization technology | Supports cross-device link aggregation M-LAG, Supports horizontal virtualization IRF2, Supports one-virtual-many-technology MDC |
| Security Mechanisms | Supports EAD security solution, Portal authentication, MAC authentication, IEEE 802.1x and IEEE 802.1x SERVER, AAA/Radius, HWTACACS, command line authentication, SSHv1.5/SSHv2, ACL traffic filtering mechanism, OSPF, RIPv2 and BGPv4 plaintext and MD5 ciphertext authentication, command line adopts hierarchical protection mode to prevent unauthorized illegal intrusion, different Configuration permissions for different user levels, limited IP address Telnet login and password mechanism, IP address, VLAN ID, MAC address and Port multi-combination binding, uRPF, MACsec and Cloudsec encryption technology, master-slave data backup mechanism, OPS open programmable system, fault alarm and self-recovery, data log, Configuration firewall, intrusion detection, behavior management, traffic control and other application hardware line cards |
| Reliability | Independent hardware Fabric Module design achieves true separation of control and forwarding. Fabric Module supports 1+1 redundant backup. Supervisor Engine Module supports 1+1 redundant backup. Power Supply supports M+N redundant backup. Backplane adopts passive design to avoid single point of failure. All components support hot-swapping. Supports different modes on switch to optimize specific functions, meeting user's system resource requirements for different scenarios. Supports real-time hot backup of Configuration data between primary and backup Supervisor Engine Modules. Supports hot patch functionality for online patching. Supports NSF/GR for OSFP/BGP/IS-IS. Supports Port aggregation, supports link cross-board aggregation. Supports INQA function, which uses direct packet marking to achieve real-time traffic detection technology, enabling precise packet loss monitoring and rapid fault localization for IP networks. Supports BFD for VRRP/BGP/IS-IS/OSPF/Static routing, implementing fast fault detection mechanisms for each protocol, supporting hardware BFD 3ms detection interval. Supports enhanced Ethernet ring network, enabling multi-site enhanced ring network, 100G rate ring network millisecond-level fault switching. Supports Ethernet OAM (802.1ag and 802.3ah). Supports RRPP. Supports Monitor-Link. Supports VCT. Supports dual boot, achieving boot redundant backup, avoiding switch failure to start due to FLASH chip failure. Supports Optical Port protection circuit design for monitoring optical Module status. If a fault occurs, the faulty Module can be isolated to ensure normal operation of other Ports and the entire switch. Supports Smart-Link. Supports ISSU technology for online upgrade of all services. Supports enhanced Ethernet ring network elastic ring packets. |
| Green Energy Saving | Supports energy-efficient Ethernet 802.3az and fan zone intelligent speed adjustment |
| Environmental requirements | Temperature range: 0°C～45°C Relative humidity: 5%～95% (non-condensing) |
| Power Supply | AC：100V～240V |
| Catalog Description | |
| Description | H3C S10506X-G Ethernet Switch Chassis,PoE |
| Key Features | |
| Feature 1 | Advanced hardware design adopts CLOS non-switched fabric architecture, with forwarding plane and control plane fully separated. Currently supports 4.8T bidirectional bandwidth per slot, providing continuous bandwidth upgrade capability. |
| Feature 2 | Adopting orthogonal hardware design, S10500X-GLine Card and Fabric Module are fully orthogonal (90 degrees). Business traffic across Line Cards is directly connected to Fabric Module via orthogonal connectors, supporting cell switching. Zero backplane wiring significantly mitigates signal attenuation. |
| Feature 3 | Supports 40GE and 100GEEthernet standards, fully meeting the application and future development needs of non-blocking campus networks. |
| Feature 4 | Supports high-density GE/10GE/25GE/40GE/100GEEthernet Port, fully meeting future application development needs. |
| Feature 5 | Supports 400G high-speed Ethernet Port, meeting the interconnection needs of metro networks and data centers. |
| Product Identity | |
| Brand | H3C |
| Series | H3C 10500X-G Series |
Reviews
No reviews yet
Be the first to review this enterprise product.
Warranty
Standard Warranty Policy
All hardware sold by ITMall includes our 3-Year Free Maintenance and 1-Year RMA Replacement Service. Please refer to our Warranty Policy for details.
- 1-Year Advance Replacement (RMA)
- 3-Year Free Repair Service
- Full coverage for functionality defects
Hassle-Free RMA Process
We streamlined the return process to minimize your network downtime. Our engineering team provides pre-return diagnostics to ensure hardware is truly defective.
- 30-Day satisfaction guarantee return window
- Automated RMA portal access for instant tracking
- Restocking fee waived for functionality issues
Certified Engineering Support
Our products are backed by CCIE-certified engineers who provide expert guidance on compatibility, configuration, and troubleshooting at no extra cost.
- Free pre-sales topology consultation
- Remote troubleshooting & firmware advice
- Simulation lab testing before dispatch
Global Logistics & Packaging
We ship to 85+ countries using premium anti-static packaging to ensure safety. Orders placed before 14:00 (GMT+8) are typically dispatched the same day.
- Double-walled boxes with customer molded foam
- Blind shipping support for channel partners
- Real-time tracking via FedEx / DHL / UPS
Resources
No downloads available for this product.
FAQ
What is the Power Supply specification for LS-10506X-G-POE?
LS-10506X-G-POE lists Power Supply as AC：100V～240V. Use this value when checking datasheet requirements, quotation details, and deployment compatibility.
What is the Hardware Architecture specification for LS-10506X-G-POE?
LS-10506X-G-POE lists Hardware Architecture as Orthogonal CLOS Architecture. Use this value when checking datasheet requirements, quotation details, and deployment compatibility.
What is the Intelligent lossless Ethernet specification for LS-10506X-G-POE?
LS-10506X-G-POE lists Intelligent lossless Ethernet as Supports PFC and AIECN, RoCEv2. Use this value when checking datasheet requirements, quotation details, and deployment compatibility.
What is the Environmental requirements specification for LS-10506X-G-POE?
LS-10506X-G-POE lists Environmental requirements as Temperature range: 0°C～45°C Relative humidity: 5%～95% (non-condensing). Use this value when checking datasheet requirements, quotation details, and deployment compatibility.
Is this product Brand New?
Yes, unless clearly marked as "Refurbished", all our products are Factory Sealed (Original New) sourced directly from authorized channels.
What is the warranty period?
We provide a comprehensive 3-Year Warranty on this item. This covers hardware defects and includes advanced replacement.
Do you offer volume discounts?
Yes! For bulk orders or project bids, please click "Quote | Help" to get a custom price proposal from our sales team.
How fast can you ship?
In-stock items ordered before 3 PM EST ship the same day. We offer overnight and 2-day shipping options via FedEx/DHL.
Still have questions?