| Key Specifications |
|---|
| Port Aggregation | Supports LACP and manual link aggregation |
| MAC Address | Supports blackhole MAC entries and configuring the maximum number of learned MAC addresses per port |
| DHCP | Supports DHCP Client, DHCP Relay, DHCP Snooping, and DHCP Server |
| IP Routing | Supports static routing, RIPv1/v2, RIPng, OSPFv1/v2, OSPFv3, policy-based routing, ECMP, and VRRP/VRRPv3 |
| MCE | Supports MCE (Multi-CE) |
| Reliability | Supports STP/RSTP/MSTP protocols, Smart Link, Smart Link multi-instance, BFD, and RRPP |
| Product Specifications |
|---|
| Port | Supports IEEE 802.3x flow control (full duplex), broadcast storm suppression based on port-rate percentage, and PPS-based broadcast storm suppression |
| Port Aggregation | Supports LACP and manual link aggregation |
| MAC Address | Supports blackhole MAC entries and configuring the maximum number of learned MAC addresses per port |
| VLAN | Supports port-based VLANs (4K), protocol-based VLANs, MAC-based VLANs, Voice VLAN, Super VLAN, PVLAN, MVRP, VLAN VPN (QinQ), and flexible QinQ |
| stacking | Supports IRF2 intelligent resilient architecture, distributed device management, distributed link aggregation, stacking through standard Ethernet interfaces, local stacking, and remote stacking |
| DHCP | Supports DHCP Client, DHCP Relay, DHCP Snooping, and DHCP Server |
| IP Routing | Supports static routing, RIPv1/v2, RIPng, OSPFv1/v2, OSPFv3, policy-based routing, ECMP, and VRRP/VRRPv3 |
| MCE | Supports MCE (Multi-CE) |
| Reliability | Supports STP/RSTP/MSTP protocols, Smart Link, Smart Link multi-instance, BFD, and RRPP |
| IPV6 | Supports ND (Neighbor Discovery), ND snooping, ND proxy, ND detection, PMTU, IPv6 Ping, IPv6 Tracert, IPv6 Telnet, and IPv6 TFTP |
| Mirroring | Supports N:1 port mirroring, traffic mirroring, and RSPAN (Remote Switched Port Analyzer) |
| Security Features | Supports user privilege management and password protection; IEEE 802.1X authentication and centralized MAC address authentication; Layer 2-Portal/triple authentication; AAA and RADIUS authentication; MAC address learning limits; MAC address binding with ports and IP addresses; SSH 2.0; DoS attack prevention; ARP intrusion detection; port isolation; and blackhole MAC entries |
| Management and Maintenance | Supports XModem/FTP/TFTP loading and upgrade; configuration through CLI, Telnet, and Console; SNMPv1/v2/v3 and web management; RMON groups 1, 2, 3, and 9 MIBs; iMC intelligent management center; system logs, hierarchical alarms, and debug information output; PING and Tracert; detection and alarms for POST, fan blockage, and device overheating; VCT cable detection; DLDP (Device Link Detection Protocol); port loopback detection; and IPv6 host features for IPv6 management |
| Catalog Description |
|---|
| Description | H3C S3600V3-54TP-EI L3 Ethernet Switch with 32*10/100BASE-T Ports, 16*10/100/1000BASE-T Ports and 6*100/1000 BASE-X SFP Ports,(AC) |
| Key Features |
|---|
| Feature 1 | H3C S3600V3-SI Series switch supports Intelligent Resilient Framework (IRF2) technology, which connects multiple physical devices together to virtualize them into a single logical device. In other words, users can view these multiple devices as a single device for management and use. |
| Feature 2 | IRF can provide users with the following benefits: Simplified management After IRF architecture is formed, it can connect to any port of any device to log into a unified logical device. By configuring a single device, the entire intelligent elastic system and all member devices within the system can be managed, without physically connecting to each member device for separate configuration and management |
| Feature 3 | In the simplified business IRF logical device, various control protocols running are also operated as a single unified device. For example, routing protocols are calculated as a single device, and with the application of cross-device link aggregation technology, it can replace the traditional spanning tree protocol, thereby eliminating extensive protocol packet interactions between devices, simplifying network operation, and shortening convergence time during network instability |
| Feature 4 | Flexible Expansion Enables elastic expansion based on user requirements, safeguarding user investment |
| Feature 5 | Newly added devices can be hot-swapped when joining or leaving the IRF fabric without affecting normal operation of other devices |
| Ordering Information |
|---|
| Base Configuration | |
| 9801A2MR | LS-3600V3-54TP-EI; H3C S3600V3-54TP-EI L3Ethernet switch Chassis, Supports 32 x10/100BASE-T Electrical Port, 16 x10/100/1000BASE-T Electrical Port, Supports 6 x100/1000BASE-X SFP Port, Supports AC |
| SFP Gigabit Optical Port | |
| 02312173 | SFP-GE-LH80-SM1550; Single-mode SFP optical module (1550 nm, 80 km, LC); Type: SFP Gigabit Optical Port |
| 0231A2UN | SFP-GE-LH40-SM1310-BIDI; SFP GigabitBIDI Optical Module (TX 1310/RX 1550 nm, 40 km, LC); Type: SFP Gigabit Optical Port |
| 0231A2UL | SFP-GE-LH70-SM1490-BIDI; SFP GigabitBIDI Optical Module (TX 1490 nm/RX 1550 nm, 70 km, LC); Type: SFP Gigabit Optical Port |
| 0231A2UP | SFP-GE-LH40-SM1550-BIDI; SFP GigabitBIDI Optical Module (TX 1550 nm/RX 1310 nm, 40 km, LC); Type: SFP Gigabit Optical Port |
| 0231A2UM | SFP-GE-LH70-SM1550-BIDI; SFP GigabitBIDI Optical Module (TX 1550/RX 1490 nm, 70 km, LC); Type: SFP Gigabit Optical Port |
| 0231A54T | SFP-STACK-Kit; Type: SFP Gigabit Optical Port |
| 0231ADWF | SFP-GE-LH20-SM1310-I; SFP Gigabit Optical Module (-40°C to 85°C, 1310 nm, 20 km, LC); Type: SFP Gigabit Optical Port |
| 0231ADWE | SFP-GE-LH40-SM1310-I; SFP Gigabit Optical Module (-40°C to 85°C, 1310 nm, 40 km, LC); Type: SFP Gigabit Optical Port |
| 0231A563 | SFP-GE-LX-SM1310-A; Single-mode SFP GE optical module (1310 nm, 10 km, LC); Type: SFP Gigabit Optical Port |
| 0231A962 | SFP-GE-LX-SM1310-D; Single-mode SFP GE optical module (1310 nm, 10 km, LC); Type: SFP Gigabit Optical Port |
| 02312170 | SFP-GE-LH40-SM1310; Single-mode SFP GE optical module (1310 nm, 40 km, LC); Type: SFP Gigabit Optical Port |
| 0231A963 | SFP-GE-LH40-SM1310-D; Single-mode SFP GE optical module (1310 nm, 40 km, LC); Type: SFP Gigabit Optical Port |
| 02312172 | SFP-GE-LH40-SM1550; Single-mode SFP optical module (1550 nm, 40 km, LC); Type: SFP Gigabit Optical Port |
| 0231A964 | SFP-GE-LH80-SM1550-D; Single-mode SFP optical module (1550 nm, 80 km, LC); Type: SFP Gigabit Optical Port |
| 0231A562 | SFP-GE-SX-MM850-A; Multi-mode SFP-GE optical module (850 nm, 0.55 km, LC); Type: SFP Gigabit Optical Port |
| 0231A961 | SFP-GE-SX-MM850-D; Multi-mode SFP-GE optical module (850 nm, 0.55 km, LC); Type: SFP Gigabit Optical Port |
| 0231A11U | SFP-GE-LX-SM1310-BIDI; Optical Module - SFP Gigabit BIDI Optical Module - TX1310/RX1490, 10 km, LC; Type: SFP Gigabit Optical Port |
| 0231A11V | SFP-GE-LX-SM1490-BIDI; Optical Module - SFP Gigabit BIDI Optical Module - TX1490/RX1310, 10 km, LC; Type: SFP Gigabit Optical Port |
| 0231AEUP | SFP-GE-SX-MM850-S; SFP Gigabit Optical Module (850 nm, 550 m, SX, LC); Type: SFP Gigabit Optical Port |
| 0231AEUN | SFP-GE-LX-SM1310-S; SFP Gigabit Optical Module (1310 nm, 10 km, LX, LC); Type: SFP Gigabit Optical Port |
| 0231A085 | SFP-GE-T; SFP GE Electrical Port Module (100m, RJ45); Type: SFP Gigabit Optical Port |
| 0231A960 | SFP-GE-T-D; SFP GE Electrical Port Module (100m, RJ45); Type: SFP Gigabit Optical Port |
| Port and Cable Configuration | |
| 04042967 | CAB-CON-1.8m; Configuration Serial Cable—1.8 m (DB9 Female to 8-pin Ethernet Port); Type: Port and Cable Configuration |
| 0404A1EE | CAB-Console-1.8m-W31R; Configuration Port Cable-1.8m (RJ45P) (UL2725(3C28AWG)) (USB AP); Type: Port and Cable Configuration |
| Product Identity |
|---|
| Brand | H3C |
| Series | H3C SOHOSeries Products |