| Product Identification |
|---|
| Model | M-ASR1K-SSD-400GB |
| Description | Cisco ASR1000 Series RP3 400 GB SSD |
| Spare Part | M-ASR1K-SSD-400GB= |
| Manufacturer | Cisco |
| Availability | 10 Units In Stock - Immediate Dispatch |
| RP3 Storage Options |
|---|
| Default Storage | 100-GB SSD (hot-swappable) |
| Upgradable To | 200-GB or 400-GB SSD |
| USB Support | 1-GB USB compact flash memory |
| Embedded Flash | 8 GB on RP3 |
| Usage | Code storage, boot, configurations, billing, logs |
| RP3 Chassis Support |
|---|
| Supported Chassis | Cisco ASR 1006-X, 1009-X, and 1013 chassis |
| RP3 Performance |
|---|
| 8-GB Memory IPv4/IPv6 Routes | Up to 1,000,000 IPv4 routes or 1,000,000 IPv6 routes |
| 8-GB BGP RR | Up to 8,000,000 IPv4 routes or 6,000,000 IPv6 routes |
| 16-GB Memory IPv4/IPv6 Routes | Up to 4,000,000 IPv4 routes or 4,000,000 IPv6 routes |
| 16-GB BGP RR | Up to 24,000,000 IPv4 routes or 17,000,000 IPv6 routes |
| 32-GB Memory IPv4/IPv6 Routes | Up to 8,500,000 IPv4 routes or 7,500,000 IPv6 routes |
| 32-GB BGP RR | Up to 24,000,000 IPv4 routes or 17,000,000 IPv6 routes |
| RP3 Memory Options |
|---|
| Default | 8-GB memory |
| Upgradable To | 16-GB, 32-GB, or 64-GB memory |
| Connectivity (RP3) |
|---|
| Console Port | RJ-45 connector |
| Auxiliary Port | RJ-45 connector |
| Management Ethernet | 10/100/1000 Ethernet port (RJ-45 connector) |
| BITS Clock | RJ-48 connector for BITS input clock and output source |
| USB Ports | 2 ports |
| Software Compatibility (RP3) |
|---|
| Minimum IOS XE | Cisco IOS XE 16.3.1 Software |
| Protocols | Refer to Cisco IOS XE 16.3.1 and later versions for protocol support. Supports QoS, MPLS, L2VPN, L3VPN, Application Visibility and Control, PfR, AppNav, Data Center Interconnect, Crypto, IPv6 |
| Reliability (RP3) |
|---|
| Redundancy | 1 + 1 redundancy in dual-route-processor configuration |
| OIR | Support for online insertion and removal (OIR) |
| NSF/SSO | Support for NSF and Stateful Switchover (SSO) |
| ISSU | Support for ISSU |
| Physical Dimensions (RP3) |
|---|
| H x W x D | 0.92 x 16.7 x 14.19 in. (0.02 x 0.428 x 0.36m) |
| Weight | 7 lb (3.2 kg) |
| Environmental (RP3) |
|---|
| Storage Temperature | -38 to 150°F (-40 to 70°C) |
| Operating Temperature Nominal | 41 to 104°F (5 to 40°C) |
| Operating Temperature Short-term | 23 to 131°F (-5 to 55°C) |
| Storage Humidity | 5 to 95% RH |
| Operating Humidity Nominal | 5 to 85% RH |
| Operating Humidity Short-term | 5 to 90% RH |
| Operating Altitude | -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) |
| Approvals Safety (RP3) |
|---|
| Safety Standards | UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03, AS/NZS 60950-1, IEC/EN 60950-1, 73/23/EEC |
| EMC Emissions (RP3) |
|---|
| Emissions | CFR 47 Part 15 (FCC) Class A, ICES 003 Class A, AS/NZ CISPR 22 Class A, CISPR 22 (EN55022) Class A, VCCI Class A, KN22, IEC/EN 61000-3-2 AC Power Line Harmonics, IEC/EN 61000-3-3 AC Voltage Fluctuations and Flicker |
| EMC Immunity (RP3) |
|---|
| Immunity Standards | IEC/EN-61000-4-2 ESD (8-kV Contact, 15-kV Air), IEC/EN-61000-4-3 Radiated (10 V/m), IEC/EN-61000-4-4 EFT (2-kV Power, 1-kV Signal), IEC/EN-61000-4-5 Surge AC (4-kV CM, 2-kV DM), Surge Signal (1-kV indoor, 2-kV outdoor), Surge DC 1-kV, IEC/EN-61000-4-6 Conducted (10Vrms), IEC/EN-61000-4-8 Magnetic (30 A/m), IEC/EN-61000-4-11 Voltage Dips |
| NEBS and ETSI (RP3) |
|---|
| NEBS | GR-1089-CORE, GR-63-CORE |
| ETSI/EN | EN300 386 Telecommunications Network Equipment EMC OTC, EN55022 Emissions, EN55024 Immunity, EN50082-1/EN-61000-6-1 Generic Immunity |
| Ordering Information (Relevant) |
|---|
| M-ASR1K-SSD-100GB | Cisco ASR1000 Series RP3 100 GB SSD |
| M-ASR1K-SSD-100GB= | Cisco ASR1000 Series RP3 100 GB SSD, Spare |
| M-ASR1K-SSD-200GB | Cisco ASR1000 Series RP3 200 GB SSD |
| M-ASR1K-SSD-200GB= | Cisco ASR1000 Series RP3 200 GB SSD, Spare |
| M-ASR1K-SSD-400GB | Cisco ASR1000 Series RP3 400 GB SSD |
| M-ASR1K-SSD-400GB= | Cisco ASR1000 Series RP3 400 GB SSD, Spare |
| ASR1000-RP3 | Cisco ASR1000 Series Route Processor 3 |
| ASR1000-RP3= | Cisco ASR1000 Series Route Processor 3, Spare |
| Features and Benefits |
|---|
| IOS XE Support | Supports QoS, MPLS, L2VPN, L3VPN, Application Visibility and Control, PfR, AppNav infrastructure, Data Center Interconnect, Crypto, IPv6 |
| High Availability | Optional redundant-processor, dual IOS XE support |
| Clocking | Stratum-3 clock, BITS input/output (RP2, ASR1002-X) |
| Modularity | Field-replaceable, hot-swappable |
| RP LEDs (General) |
|---|
| PWR | Green - All power rails within specs |
| STAT | Green - IOS booted, Yellow - BootROM loaded, Red - Failure/boot |
| ACTV | Green - Active RP |
| STBY | Yellow - Standby RP |
| CRIT/MAJ/MIN | Red/Amber alarms |
| LINK/DISK/HD/USB/BF/CARRIER | Activity/link status indicators |
